This is a quick guide for the Realistic Pro42 radio scanner
The scanner will start scanning, when you turn it on.
Scan button is top left.
Manual button is just below the scan button.
Program button is just to the right of the scan button.
Dot, or period button is the second one in from the bottom
The enter button is bottom right.
The number pad is the last 3 keys on the right side of the
group of buttons on the face of the scanner.
To Program a Frequency.
1 Press manual to take the scanner out of scan mode.
2 Sellect the button from the key pad on which you would like
the new frequency to appear.
3 Press the program button.
4 Type in the new frequency, using the dot or period key where
5 Press the enter Key.
Programming is complete.
Disclaimer: The information on this site is provided as
a public service to the blind and visually handicapped community. While we have
done our best to ensure the information provided is accurate, please realize
the use of any information on this site is solely at your discretion and we
take no responsibility for use or attempted use of this information.