Exploring Logic Express 9 Exploring Logic Express 9 Apple Inc.KK 2009 Apple Inc. All rights reserved.Copyright © Your rights to the software are governed by the accompanying software license agreement. The owner or authorized user of a valid copy of Logic Express software may reproduce this publication for the purpose of learning to use such software. No part of this publication may be reproduced or transmitted for commercial purposes, such as selling copies of this publication or for providing paid for support services. The Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries. Use of the keyboard Apple logo (Shift-Option-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws. Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors. Because Apple frequently releases new versions and updates to its system software, applications, and Internet sites, images shown in this book may be slightly different from what you see on your screen. Apple 1 Infinite Loop Cupertino, CA 95014 408-996-1010 www.apple.com Apple, the Apple logo, Logic, and Ultrabeat are trademarks of Apple Inc., registered in the U.S. and other countries. Other company and product names mentioned herein are trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the performance or use of these products. Demo project screenshots from Thievery Corporations The Numbers Game provided courtesy of ESL Music, Inc. The Numbers Game © 2008 ESL Music. All rights reserved. The Numbers Game Written & Produced by: Thievery Corporation Published by: Garza y Hilton Musica (BMI) admin by Bug Music/Swing T Publishing (BMI) Copyright 2008, Thievery Music, LLC Released, 2008, ESL Music, Inc. . Contents 3 7 Chapter 1: Welcome to Logic Express 8 Opening the Demo Project 8 Using Key Commands 9 Chapter 2: Building a Basic Project 9 Creating a Project 13 Exploring the Arrange Window 16 Playing Instruments 18 Adding Apple Loops 25 Navigating the Project 29 Setting the Project Tempo 30 Exploring the Audio Bin 31 Choosing Tools 33 Creating a Basic Arrangement 36 Exploring a Tracks Channel Strip 39 Exporting the Project 41 Key Concepts . 4 Contents 45 Chapter 3: Working with Instruments and Effects 46 Adding Individual Instruments and Effects 51 Working with Plug-in Settings 54 Loading Channel Strip Settings 58 Key Concepts 59 Chapter 4: Recording and Comping Audio 59 Setting the Metronome and Count-in 62 Making an Audio Recording 65 Recording Audio Takes 67 Exploring Take Folders 70 Creating and Editing Comps 75 Editing Take Regions 77 Managing Take Folder Contents 79 Key Concepts 81 Chapter 5: Recording MIDI 81 Making a MIDI Recording 84 Quantizing MIDI 86 Overdub Recording MIDI 88 Replace Recording MIDI 89 Recording MIDI Takes 91 Key Concepts . Contents 5 93 Chapter 6: Creating an Arrangement 94 Previewing the Demo Project 96 Dividing Regions 98 Merging Regions 99 Copying Regions 103 Cropping Regions 105 Editing Arrange Sections 106 Key Concepts 107 Chapter 7: Flex Time Editing 109 Exploring Flex View and Flex Modes 111 Creating and Moving Flex Markers in Flex View 119 Creating and Moving Flex Markers with the Flex Tool 121 Quantizing Audio 123 Key Concepts 125 Chapter 8: Editing MIDI Events 125 Exploring the MIDI Editors 128 Selecting Notes 130 Creating Notes 131 Editing the Position of Notes 133 Editing the Length of Notes 135 Muting Notes . 136 Editing the Velocity of Notes 138 Quantizing Notes 139 Key Concepts 141 Chapter 9: Mixing the Project 142 Exploring the Mixer 144 Working with Channel Strip Groups 147 Adding Effects to Multiple Channel Strips 149 Creating a Submix 150 Routing Signals with a Multi-Output Instrument 153 Key Concepts 155 Chapter 10: Automating Your Mix 156 Exploring Track Automation 159 Using Touch and Latch Modes 162 Creating and Editing Automation Nodes and Lines 163 Key Concepts 165 Chapter 11: Getting Answers 165 Exploring Logic Express Help 166 Whats Next? . 1 7 Welcome to Logic Express If you are new to Logic Express or have a limited knowledge of the application, this guide is for you. Each chapter of this book presents major features and guides you in trying things out. Chapter 2 lets you build a basic project from scratch, while the remaining chapters take you through the entire production process including recording, arranging, editing, and mixing. This guide assumes that youve installed Logic Express on your computer. If you havent, see the Installing Your Software booklet that comes with Logic Express. You should also connect the music equipment that you plan to use, such as your MIDI keyboard, audio interface, musical instruments, or microphone, to your computer. For full details, see the Setting Up Your System chapter in the Logic Express User Manual. (Open Logic Express, choose Help > Logic Express Help, then click Logic Express 9: User Manual.) . 8 Chapter 1 Welcome to Logic Express Opening the Demo Project While you can use your own projects to support the tasks in this guide, many of the tasks from Chapter 4 onward reference the contents of The Numbers Game, a demo project taken from Thievery Corporations fifth studio album, Radio Retaliation, and featuring Chuck Brown. To open The Numbers Game demo project: Open Logic Express, then choose Help > Exploring Logic Express Demo Project.mm Using Key Commands You can execute nearly every Logic Express function with a computer keyboard shortcut, known as a key command. This book includes references to those key commands that have default computer keyboard shortcuts, using the U.S. and U.S. with Numeric Keypad keyboard presets. You can use the Key Commands window to assign key commands to your computer keyboard, allowing you to suit your own working style. To open the Key Commands window: Choose Logic Express > Preferences > Key Commands in the main menu bar (or press mmOption-K). Full details on the Key Commands window are found in the Logic Express User Manual. . 2 9 Building a Basic Project This chapter gets you up and running with Logic Express in the shortest possible time. If you are new to digital music production, you can use this chapter to learn how to use the basic features of Logic Express to build a simple music project from scratch. Creating a Project Youll start by opening Logic Express and creating a new project, then youll save it. Open Logic Express and create a new project: Double-click the Logic Express icon in your Applications folder.1   . 10 Chapter 2 Building a Basic Project In the Templates dialog that appears, click the Empty Project button.2 Empty Project button In the New Tracks dialog, select the Software Instrument option, then click the Create 3 button.   . Chapter 2 Building a Basic Project 11 Understanding Tracks and Regions An audio track is a lane in the Arrange area that is used for the playback, recording, and editing of audio regions. An audio region is a rectangular object that resides on an audio track. It can be freely edited and its boundaries correspond to start and end points within the underlying audio file it is associated with. A software instrument track is a lane in the Arrange area that is used for the playback, recording, and editing of MIDI regions, which play internal software instruments. A MIDI region is a rectangular object that resides on a software instrument track. It contains MIDI eventsindividual notes or commandsthat are generally created with a MIDI keyboard.     . After creating a project, you can quickly save it. When you save a project, a project file is saved within a project folderwhich can contain the projects audio files and other assets (such as sample and movie files). Saving a project with assets simplifies archiving and exchanging projects but increases the project folders size. Save the project: Choose File > Save As in the main menu bar (or press mmCommand-Shift-S), make the following selections in the Save As dialog, then click Save. Type a project name. Browse to a save location. Ensure that the Include Assets and Copy external audio files to project folder checkboxes are selected. Selecting additional options increases the project folders size. . Exploring the Arrange Window The Arrange window is the primary working window of Logic Express. It incorporates all working areas and editors, including the Arrange area. The Arrange area is the primary working space of Logic Express. It is used to record, edit, and arrange the audio and MIDI regions of a project. Your Arrange window should look similar to this: Inspector buttonMedia buttonTransport barInspectorEditor buttonsArrange area (white frame indicates key focus area) Library tabToolbar . Try This Explore the Inspector: Click the Inspector button to hide or show the Inspector. The Inspector shows mmparameters for the selected working area or editor. For example, if the Arrange area is active (indicated by a white frame), you can set region and track parameters. Also shown are the channel strips that reference the selected track in the Arrange area. Click the Score button at the bottom of the Arrange area. The Inspector now shows mmparameters that are relevant to working in the Score Editor. Click the Arrange area. The Inspector again shows parameters and channel strips that mmare relevant to working in the Arrange area. Click the disclosure triangle to the left of MIDI Thru at the top of the Inspector. This mmshows or hides the area where you set parameters for the selected region in the Arrange area. Click the disclosure triangle to the left of Inst 1 at the top of the Inspector. This shows mmor hides the area where you set parameters for the selected track in the Arrange area. Get to know the toolbar: Control-click the toolbar, then choose Customize Toolbar from the shortcut menu. This mmdialog shows the full list of functions accessible from the toolbar. You can access or hide certain onscreen areas, such as the Media or Lists area, or carry out key functions, such as zooming the track and splitting regions. . View the editors: Click the Sample Editor, Piano Roll, and Score buttons at the bottom of the Arrange mmarea. Clicking these buttons shows or hides the editorswhere you edit audio and MIDI regions. Click the Mixer button. This shows or hides the area where you mix your project.mm Get to know the Transport bar: Control-click the Transport bar, then choose Customize Transport Bar from the shortcut mmmenu. This dialog shows the full list of functions accessible from the Transport bar. You use the Transport bar to control recording and playback functions. Explore the Media area: Click the Media button at the top right of the Arrange window. This shows or hides the mmMedia areawhere you access audio and MIDI files, either your own or prerecorded. Click the Bin tab to reveal an area that is used for project audio file and region mmmanagement and conversion tasks. Click the Loops tab to reveal an area that contains prerecorded loops for adding to mmyour project. Click the Library tab to reveal an area that is used to handle all settings files for channel mmstrips, effects, and instruments. Click the Browser tab to reveal an area that is used to browse, select, and manage all mmmedia types supported by Logic Express. . Playing Instruments You can use the Library to insert an instrument, plus its effects, into a tracks channel strip. This allows you to play the instrument from the selected track. Getting Ready Click the Library tab in the Media area if the Library is not open.mm   Try This Load an instrument (plus its effects): Navigate through the categories and subcategories in the Library, then click any of the 1 entries (known as settings).   The chosen instrument and its effects are loaded to the selected tracks channel strip in the Inspector. Use your MIDI keyboard (or the Logic Express Caps Lock keyboard) to play some notes.2 . Use the Caps Lock keyboard to generate MIDI notes: Press the Caps Lock key on your computer keyboard to reveal a virtual keyboard on 1 the screen.   Use your computer keys as follows to generate MIDI notes:2 Use the numeric keys to define the octave for the MIDI keyboard. Use the first two rows of letter keys as counterparts for MIDI keyboard keys. Use the lowest row of letter keys to set MIDI note velocity. Use the Space bar for the Sustain function. . Adding Apple Loops You can start composing a song by dragging Apple Loops from the Loop Browser to the Arrange area. Apple Loops are prerecorded musical phrases or riffs that are available in a variety of instruments, genres, and moods. There are two types of Apple LoopsApple Loops audio files and software instrument Apple Loops filesand you can add them to your project in the following ways: Add Apple Loops audio files to audio tracks. The resulting audio region on the track contains the original audio recording. Add software instrument Apple Loops files to software instrument tracks. The resulting MIDI region contains the original MIDI performance, with its instrument and effect settings added to the tracks channel strip. Add software instrument Apple Loops files to audio tracks. The resulting audio region contains the original audio recording, without the instrument and effect settings. . Getting Ready Open the Loop Browser: Click the Loops tab in the Media area, then click one of the category buttons.mm Green labels indicate software instrument Apple Loops files. Blue labels indicate Apple Loops audio files. Category buttonsView buttonsReset buttonSearch field . Try This Preview Apple Loops: Click any loop at the bottom of the tab to start playback. A second click stops playback. mmRepeat this for different loops. Add a software instrument Apple Loops file: Click the Reset button in the Loops tab to reset any active category button selection.1 Click the Rock/Blues category button, locate Classic Rock Steel 01, then drag the loop 2 onto the Inst 1 track, aligning its start position at bar 1. A MIDI region is added to the track. The MIDI region contains the original MIDI performance, with its instrument and effect settings added to the tracks channel strip. EffectsMIDI regionInstrument . Search for a software instrument Apple Loops file: Click the Reset button, type Woody Latin Bass 01 in the Search field, then press the 1 Return key. The matching file is displayed in the file list. Search fieldSearch result Drag Woody Latin Bass 01 into the empty Arrange area, to start at bar 1. 2 A new software instrument track is created, with the loop added to it. . Add an Apple Loops audio file to your project: Click the All Drums button, then drag Live Edgy Drums 05 into the empty Arrange area, mmto start at bar 1. A new audio track is created, with the original audio recording added to it. Audio region Add a software instrument Apple Loops file to an audio track: Click the Reset button, followed by the Elec Piano button, then drag Fusion Electric mmPiano 01 onto the existing audio track lane, directly after Live Edgy Drums 05. The software instrument Apple Loops file is added as an audio region, containing the original audio recording. . Browse Apple Loops by category: Click the left View button to switch to Column view.1 Click here to switch to Column view. Click the By Genres category folder, followed by Electronic in the second column, 2 followed by Beats in the third column.   . The value in brackets indicates the number of files that fall into this subcategory (Beats). The files are shown at the bottom of the tab. Tag Apple Loops as Favorites: For any Apple Loops that you like, or wish to use again later, select the Fav (Favorites) mmcheckbox.   This adds the loop to the Favorites category, displayed whenever you click the Favorites button or category. . Navigating the Project You control navigation and playback actions with the Transport bar or Bar ruler. Transport bar:   Bar ruler: Bar rulerPlayhead (indicates the current playback position.) The Transport bar and Bar ruler are closely tied to each other, with several functions accessible in both. These include the Play and Stop commands, activation of Cycle mode, and setting the cycle length. . Try This Start and stop playback: Click the Play button on the Transport bar (or press the Space bar on your computer mmkeyboard) to start playback. Stop buttonPlay button Click the Stop button on the Transport bar (or press the Space bar) to stop playback.mm Double-click the lower part of the Bar ruler to start playback from the clicked position. mmAnother double-click stops playback. Double-click the lower part of the Bar ruler. . Move the playhead: Click the lower part of the Bar ruler to move the playhead to the clicked position.mm Drag the playhead to a new position.mm Press the Return key when the project is mmnot playing. The playhead moves to the project start position. Click the Rewind or Forward button on the Transport bar during playback.mm Rewind buttonForward button With each click, the playhead either jumps back to the previous bar (Rewind) or ahead to the next bar (Forward). . Loop playback of a project section: Click the shaded gray cycle area in the top part of the Bar ruler.1 Click here to activate the cycle. The cycle range is activated between the left and right locator positions. Left locatorRight locator Drag the left or right locator in the Bar ruler to extend or shorten the cycle range.2 Press the Space bar to start playback. 3 The playhead continually loops playback within the cycle range. . Setting the Project Tempo New projects default to a project tempo of 120 bpm or to the native tempo of the first Apple Loops file added. When you add subsequent Apple Loops, they automatically play at the project tempo. You can adjust the tempo to suit the style or mood of your music. Tempo display Try This Set the project tempo: Press the Space bar to start playback of the project.1 Drag the Tempo display verticallyupward for a faster tempo or downward for a 2 slower tempo. The project tempo changes in real time, making it easier to find the most suitable tempo for your project. . Exploring the Audio Bin The Audio Bin can be viewed as an audio file catalog for your project. Once an audio file has been added to your project, it appears in the Bin. Getting Ready Open the Bin: Click the Bin tab at the top of the Media area (or press the B key). The two Apple Loops mmaudio files you added to the audio track in the previous section appear in the Bin.   The Info column displays audio file and region information. The horizontal bars indicate the overall audio file length. The colored sections of these bars indicate the location and size of audio regions within the audio file. Try This Import an audio file into the Bin: Choose Audio File > Add Audio File, browse to a location where youll find an audio file, mmclick the Add button, then click the Done button. The audio file is added to the Bin. Add an audio file to the Arrange area: Drag the audio file you just imported from the Bin into the Arrange area.mm . Choosing Tools Key to selecting and altering audio and MIDI regions in the Arrange area are the tools. You change the currently active tool by choosing the appropriate Tool menu item. The pointer adopts the shape of the selected tool, making it easy to recognize. In this section, youll assign tools that can be accessed via left-clicking or Command-clicking. Command-click Tool menuLeft-click Tool menu Try This Choose a tool: Click the Left-click Tool menu at the upper right of the Arrange area, then choose a tool.mm Press the Esc key mmon your computer keyboard. The Tool pop-up menu floats at the current pointer position. Choose a tool from the pop-up menu to make it active. Press the Esc key twice more to make the Pointer tool active. . Click the Command-click Tool menu at the upper right of the Arrange area, then mmchoose a tool. A second tool is assigned for use via Command-click. Zoom regions: With the Zoom tool selected, drag across the Classic Rock Steel 01 region. The screen is mmzoomed in on the selected area. With the Zoom tool selected, click anywhere in the Arrange area background. The mmzoom level returns to the original setting or backtracks through previous zoom steps if the tool was used multiple times. If the Zoom tool is not assigned in the Tool menu, holding down the Control and Tip: Option keys provides quick access to the zoom in and out behaviors just described. . Creating a Basic Arrangement Youll do the majority of region editing and arrangement in the Arrange area. Besides standard copy, cut, and paste operations, you can move, delete, loop, and resize regions, and more. Try This Move regions: Using the default Pointer tool, drag Woody Latin Bass 01 to bar 5 and Live Edgy Drums mm05 to bar 9. Delete a region: Select the Fusion Electric Piano 01 mmaudio region on the audio track, then press the Delete key. The region is deleted from your arrangement but not from the project. Click the Audio Bin tab and youll find that the region is still there. Loop regions: Drag the upper-right corner of the Classic Rock Steel 01 region to the right (note the mmLoop pointer), up to bar 9. Loop pointer . Drag across the other two regions to select them, then select the Loop checkbox in mmthe Inspectors Region Parameter box. The two selected regions loop to the project end. Loop checkboxRegion Parameter box Press the L key to quickly loop or unloop selected regions.Tip: . Change the length of regions: Drag the lower-right corner of the Woody Latin Bass 01 region from bar 9 to bar 7. The mmlooped regions are also resized in length. Resize pointer . Exploring a Tracks Channel Strip A tracks content is played back through a channel strip. Audio channel strips control the playback and recording of audio signals on audio tracks. Instrument channel strips allow you to use and control software instruments. Software instrument plug-ins are inserted into the channel strips Instrument slot. The instrument channel strip can then be driven by a recorded MIDI region, or by direct MIDI inputplaying your MIDI keyboard. Youll explore some of the channel strip controls that are used when playing back a tracks content through a channel strip. . Getting Ready Display a tracks channel strip: Select any software instrument track in the Arrange area, and activate the Inspector mmbutton (or press the I key). Solo buttonMute buttonInstrument slot (instrument channel strips only) Insert slotVolume faderPan/Balance knob . Try This Mute and unmute channel strips and tracks: Click the channel strip Mute (M) button. The track Mute button is also activated.mm Click the track Mute button (or press Control-M). The channel strip Mute button is also mmactivated. Drag over the Mute buttons of several tracks. They are all activated in one swipe.mm Command-click the track Mute button. The mute state of all Mute buttons is cleared.mm Solo and unsolo channel strips and tracks: Repeat each of the previous tasks but this time using the channel strip Solo (S) button mmand the track Solo button (or pressing Control-S). Adjust the volume level of a channel strip: Drag the channel strips Volume fader up or down.mm Option-click the Volume fader. The Volume fader is reset to the default value.mm Adjust the panning or balance of a channel strip: Drag the Pan/Balance knob vertically or horizontally.mm Option-click the Pan/Balance knob. The Pan/Balance knob is reset to the default value.mm Open an existing plug-in: Double-click any used Insert slot or Instrument slot on the channel strip. The plug-in mmwindow of the inserted effect opens. . Exporting the Project To share your music project, you can export it in various audio file formats such as MP3 or AIFF. You can also add it directly to your iTunes library. This export process is known as bouncing. Try This Bounce your mix: Click the Bounce button in the top right of the Arrange toolbar.1   . In the Bounce dialog, choose your settings for MP3 file creation:2   If the cycle is active, only the project section spanned by the cycle area is Note: exported. You can change this by editing the Start and End fields in the Bounce dialog. Select the Add to iTunes library checkbox to add the file to your iTunes library.3 Click the Bounce button.4 The project section is bounced. . Key Concepts Project: A Logic document. It contains all MIDI regions and references to the audio files to be played back. A project file is saved within a project folder, which can contain the projects audio files and other assets (such as video and sample files). Saving a project with assets simplifies archiving and exchanging projects but increases the project folders size. Audio track: A lane in the Arrange area that is used for the playback, recording, and editing of audio regions. Audio region: A rectangular object that resides on an audio track. It can be freely edited, and its boundaries correspond to start and end points within the underlying audio file it is associated with. Software instrument track: A lane in the Arrange area that is used for the playback, recording, and editing of MIDI regions, which play internal software instruments. MIDI region: A rectangular object that resides on a software instrument track. It contains MIDI eventsindividual notes or commandsthat are generally created with a MIDI keyboard. Arrange window: The primary working window of Logic Express. It incorporates all working areas and editors, including the Arrange area. Arrange area: The primary working space of Logic Express. It is used to record, edit, and arrange the audio and MIDI regions of a project. Inspector: Area at the left edge of the Arrange window and editors, containing the Parameter boxes and channel strips of the selected track. Toolbar: Area at the top of the Arrange window where you can access or hide certain onscreen areas or carry out key functions. . Editors: Areas below the Arrange area where you can edit audio and MIDI regions, or mix your project. Transport bar: Area at the bottom of the Arrange window where you can control recording and playback functions. Media area: Area containing several tabs where you can access audio and MIDI files, either your own or prerecorded. Bin tab: Tab within the Media area that is used for project audio file and region management and conversion tasks. Loops tab: Tab within the Media area that contains prerecorded loops for adding to your project. Library tab: Tab within the Media area that is used to handle all setting files for channel strips, effects, and instruments. Browser tab: Tab within the Media area that is used to browse, select, and manage all media types supported by Logic Express. Instrument slot: A panel on a channel strip where you insert an instrument plug-in. Insert slot: A panel on a channel strip where you insert an effect plug-in. Bar ruler: Ruler at the top of the Arrange area. It displays musical time units, including: bars, measures, beats, and beat divisions. Playhead: A vertical white line that indicates the current playback position in all horizontal, time-based windows. Left and Right locators: Locators that define the start and end points of a cycle range in the Bar ruler. Cycle function: A function that constantly repeats the area between the left and right locator positions. . Apple Loops: Prerecorded audio and MIDI-based files located in the Loop Browser. Channel strip: A virtual representation of a mixing console channel strip. Contains Mute and Solo buttons, Volume fader, Pan/Balance control, Insert slots, and more. Audio channel strip: Controls the playback and recording of audio signals on an audio track. Instrument channel strip: Allows you to use and control software instruments. Software instrument plug-ins are inserted into the channel strips Instrument slot. The instrument channel strip can then be driven by a recorded MIDI region or by direct MIDI inputplaying your MIDI keyboard. . 3 45 Working with Instruments and Effects Logic Express provides a number of ways to add instruments and effects to your channel strips. Channel strips contain Insert slots, which are used for inserting effects. Effects color or shape the tone of existing audio recordings, software instruments, and external audio sources in real time. Instrument channel strips also feature an Instrument slot, which is used for inserting instruments. Instruments are used for real-time playback in Logic Express. Instrument slot (instrument channel strips only) Insert slots . 46 Chapter 3 Working with Instruments and Effects You can choose whether to insert effect and instrument plug-ins on an individual basis, directly on the channel strips Insert and Instrument slots, or to load channel strip settings. Youll experiment with both methods in this chapter. Adding Individual Instruments and Effects In this section, youll add instrument and effect plug-ins directly on the channel strip. Getting Ready Create a software instrument track and display the Inspector: Do one of the following:1 If you are using an existing project, click the Add (+) button above the track list, select the Software Instrument option in the New Tracks dialog, then click Create.   If you want to create a new project, see Chapter 2 for details. If the Inspector is not visible, click the Inspector button in the Arrange toolbar (or press 2 the I key).   . Chapter 3 Working with Instruments and Effects 47 Try This Insert an instrument into a channel strip: Click the Instrument slot on the left Arrange channel strip, then choose any instrument mmfrom the plug-in menu. The plug-in is loaded and the window opens. Use your MIDI keyboard (or the Logic Express Caps Lock keyboard; see Chapter 2) to play some notes. Instrument slot with instrument plug-in loaded . Insert an effect into a channel strip: Click the top Insert slot on the left Arrange channel strip, then choose any effect from mmthe plug-in menu. The plug-in is loaded and the window opens. Insert slot with effect plug-in loaded . Insert an EQ into a channel strip: Double-click the EQ area at the top of the left Arrange channel strip. A Channel EQ is mmautomatically inserted into the first available Insert slot if the top one is already used, which it would be if youve followed the previous steps. Insert slot with Channel EQ loadedEQ area You can also Option-double-click the EQ area to insert the Channel EQ as the first plug- in, moving all existing plug-ins one slot down.   Replace a plug-in: Click and hold down any occupied Instrument slot or Insert slot, then choose a mmdifferent plug-in from the respective pop-up menu. If a plug-in window is already open, it updates to reflect the new plug-in. Otherwise, a new plug-in window opens. . Remove a plug-in: Click any occupied Instrument slot or Insert slot, then choose No Plug-in from the pop-mmup menu. The plug-in is removed from the slot, leaving it empty. Deactivate a plug-in without removing it: Option-click the occupied Instrument slot or Insert slot. The slot turns from blue to gray, mmwhich indicates that the plug-in is on the channel strip but no longer active. Bypassed plug-in Double-click the occupied Instrument slot or Insert slot, then click the Bypass button at mmthe left of the plug-in window header. Indicates an active plug-in. Indicates a bypassed plug-in. . Working with Plug-in Settings A plug-in setting is a set of plug-in parameter values that can be loaded, saved, copied, or pasted via the Settings menu. Click here to access the Settings menu in the plug-in header. Plug-in settings are stored with the project file and are automatically recalled the next time the project is loaded. You can change these settings individually by adjusting individual parameters or by loading an entire setting for the plug-in. You can also save and recall any changes you make to plug-in settings. Getting Ready Open a plug-in window (if one is not already open): Double-click any occupied Instrument slot or Insert slot.mm . Try This Adjust individual plug-in settings: Adjust individual controls in any open plug-in window.mm Click switches or buttons to turn the parameter on or off. Drag knobs vertically to adjust the parameter value. Drag slider handles to adjust the parameter value. Option-click a parameter to reset it to the default value. Save the new plug-in settings: Choose Save Setting As from the Settings menu, type a name for the new setting, then mmclick Save. A new entry (with the name you entered) is added to the Settings menu, just above the list of presets. . Load a setting: Choose a different setting from the list of presets at the bottom of the Settings menu.mm Reload the setting you saved previously from the Settings menu.mm Click the Next or Previous Setting buttons in the plug-in header. The next or previous mmsetting from the list of presets is loaded. Previous Setting buttonNext Setting button Click any occupied Instrument slot or Insert slot. A white frame appears around the slot, mmand the Library tab updates to display a list of settings (preset patches) for the chosen plug-in. Choose a different setting to load it for the selected plug-in.   . Loading Channel Strip Settings You can load a whole chain of plug-ins using channel strip settings. When you load a channel strip setting to an audio channel strip, you load a chain of effects. In the case of instrument channel strips, you load an instrument and a chain of effects. Channel strip settings can be accessed from the Setting button directly on the channel strip or from the Library tab in the Media area. Getting Ready Select a software instrument track and open the Library: Select the software instrument track used in the previous section.1 Click the Library tab in the Media area if the Library is not open.2   . Try This Load a channel strip setting from the Library: Navigate through the categories and subcategories in the Library, then click any of the 1 entries (known as settings).   The Setting button, Insert slots, and Instrument slot on the left Arrange channel strip are updated to reflect the channel strip setting and its effect and instrument plug-ins. Setting buttonInstrument slotInsert slots Use your MIDI keyboard (or the Logic Express Caps Lock keyboard; see Chapter 2) to 2 play some notes. . Repeat steps 1 and 2, trying out different channel strip settings. Play some notes on 3 your keyboard after each change of setting. Load a channel strip setting in the Arrange channel strip: Click and hold down the Setting button in the left Arrange channel strip, navigate mmthrough the setting categories and subcategories, then click one.   The Setting button, Insert slots, and Instrument slot on the left Arrange channel strip are updated to reflect the channel strip setting and its effect and instrument plug-ins. . Select the previous or next channel strip setting: Click the Setting button in the left Arrange channel strip, then choose Previous Channel mmStrip Setting or Next Channel Strip Setting from the pop-up menu. The Setting button, Insert slots, and Instrument slot on the channel strip are updated to reflect the new setting. Save and recall a channel strip setting: Navigate through the categories and subcategories in the Library, then click any of the 1 entries. The Setting button, Insert slots, and Instrument slot on the left Arrange channel strip are updated to reflect the channel strip setting and its effect and instrument plug-ins. Click the left Arrange channel strips third Insert slot, then choose Amps and Pedals > 2 Amp Designer. The Amp Designer plug-in window opens. Change some settings. Click the channel strips Setting button, choose Save Channel Strip Setting as from the 3 pop-up menu, type a name for the channel strip setting in the dialog, then click Save. Click the channel strips Setting button, then choose a different setting from the pop-4 up menu. Your channel strip setting is replaced with the new one. Click the Setting button, then choose your previously saved channel strip setting from 5 the pop-up menu. Your previously saved setting is recalled. Reset a channel strip setting: Click the Setting button in the left Arrange channel strip, then choose Reset Channel mmStrip from the pop-up menu. In a single action, the channel strip setting name, the Instrument slot, and the Insert slots are reset to their default values. . Key Concepts Channel strip: A virtual representation of a mixing console channel strip. Can be used to insert instruments and effects using the channel strips Instrument and Insert slots. Instrument slot: A panel on a channel strip where you insert an instrument plug-in. Insert slot: A panel on a channel strip where you insert an effect plug-in. Effects: Color or shape the tone of existing audio recordings, software instruments, and external audio sources, in real time. Instruments: Used for real-time playback in Logic Express. Channel strip setting: Represents the routing of a channel strip, including all inserted effects or instruments (plus their settings). Library tab: Tab within the Media area that is used to handle all setting files for channel strips, effects, and instruments. EQ: Shortened form of equalizer. Equalizers are used to boost or cut frequencies in an audio signal. . 4 59 Recording and Comping Audio You can record and comp audio directly in the Arrange area. In this chapter, youll try out some basic audio recording techniques and experiment with take folder editing and comping. Setting the Metronome and Count-in As preparation for recording, you should check the metronome and count-in settings. Metronome: Produces a click in the projects tempo that can be heard during recording or playback. The click makes it easier to play in time with the tempo. Count-in: Clicks heard before the start of a recording, making it easier to get into the projects groove. Try This Set the metronome: Control-click the Metronome button on the Transport bar, then choose Metronome 1 Settings from the shortcut menu. Metronome button . 60 Chapter 4 Recording and Comping Audio In the Metronome pane, define when you want to hear the metronome clickon every 2 bar, beat, or divisionby selecting the corresponding checkboxes.   Select the Click while recording and Only during count-in checkboxes.3 This allows you to hear a count-in of 1 bar before recording begins. If you want to change the default count-in setting, see the following task. . Chapter 4 Recording and Comping Audio 61 Change the count-in: Click the Recording button in the Project Settings window. In the Recording pane, mmchoose an option from the Count-in pop-up menu. You can record without a count-in, set a count-in of a specific amount of bars, or set a count-in time signature.   . Making an Audio Recording When you make a single audio recording, an audio region that displays a graphical overview of the waveform is created on the selected Arrange track. Getting Ready Create a new audio track: If youre using an existing project, click the Add (+) button above the track list, select mmthe Audio option in the New Tracks dialog, then click Create.   If you want to create a new project, see Chapter 2 for details.mm . Set up a channel strips track for recording: Click the Input slot of the left Arrange channel strip to choose the input for the 1 connected instrument. Insert slotInput slotInput Monitoring button If you want, you can add effects that fit your instrument to the channel strip. For 2 example, if you want to record a guitar, click the top Insert slot of the left Arrange channel strip, then choose Amps and Pedals > Amp Designer from the pop-up menu. Repeat the steps for Insert slot 2, choosing Pedalboard from the pop-up menu. Turn on the Input Monitoring button. 3 This allows you to hear incoming audio, even when the track is not record-enabled (useful for setting audio levels or practicing before recording). Play your guitar and you should hear it as well as see the level meters moving on the left Arrange channel strip. . Try This Record an audio track: Click the selected audio tracks Record Enable button.1 The track is ready for recording. Click the Record button on the Transport bar to start recording. You can also press the 2 Asterisk (*) key on keyboards with a numeric keypad, or the R key on other keyboards. Record button Recording will begin after the predefined count-in. Play your instrument.3 Click the Stop button on the Transport bar (or press the Space bar) to stop recording.4 Stop button The selected audio track contains a new audio region that displays a graphical overview of the waveform. . Recording Audio Takes When you record over a pre-existing region, Logic Express creates what is called a take folder, which contains multiple take regions. A common scenario is when you record multiple passes while in Cycle mode; for example, if you are recording multiple versions of a solo. You can also do this by simply recording over an existing region. Make sure that the Replace button on the Transport bar is turned Note: off. Replace button Getting Ready Create a cycle based on an existing region: Select the audio region that you recorded in the previous section, and click the Set mmLocators button in the Arrange toolbar. Cycle mode is turned on, with the left and right locators set to match the audio region start and end points. Left locatorRight locator . Try This Record multiple audio takes: Press the Return key. 1 The playhead moves to the project start position. Press the Asterisk (*) or R key to start recording.2 Recording begins after the predefined count-in. Play your instrument and record as many cycle passes as you wish.3 Press the Space bar to stop recording.4 The selected audio track contains a take folder with multiple take regions inside. . Exploring Take Folders In this section, youll look at how to open take folders and how to choose individual takes for playback in your project. Youll also listen to an original compthe best parts from several take recordings combined into one master takein the demo project. Getting Ready Open the demo project and set an appropriate zoom level: Open The Numbers Game demo project.1 Turn on the track Solo button for Track 1: Chuck Vox.2 Click anywhere in the Arrange area background to deselect all regions on Track 1: 3 Chuck Vox, then click the take folder Chuck Vox.3 at bar 23 to select it. Take folder Click the Set Locators button in the Arrange toolbar to turn on Cycle mode.4 Holding down Control-Option (which activates the Zoom tool), drag across the take 5 folder Chuck Vox.3 on Track 1: Chuck Vox to zoom the working area. . Try This Open the take folder: Double-click the closed take folder Chuck Vox.3 on Track 1: Chuck Vox. The take folder mmopens, displaying two takes, Chuck Vox Alt and Chuck Vox 2, on individual lanes. Chuck Vox 2 is the most recent take. Take folderIndividual takes Listen to the current comp: Press the Space bar to listen to the current comp selection.mm . Choose a take region for playback: Click the triangle in the upper-right corner of the take folder, then choose Take 1: mmChuck Vox Alt from the Take Folder pop-up menu. Click here to open the Take Folder pop-up menu. The chosen take is displayed in color (the color is also reflected in the take folder) and the take that is not selected is displayed in gray.   . Choose Take 2: Chuck Vox 2 from the Take Folder pop-up menu. Again, the chosen take mmis displayed in color (the color is also reflected in the take folder) and the take that is not selected is displayed in gray.   Creating and Editing Comps You can select individual take regions for playback in your project. But what if you want to combine selected parts of each take region for playbackthe first section of Chuck Vox Alt followed by the end section of Chuck Vox 2, for example? This section shows you how. Getting Ready You can switch take folders between two different editing modes, with the active editing mode determining the types of edits that can be made in the take folder. This section assumes that the Quick Swipe Comping mode is on, allowing you to create and edit comps. . Verify the take folders editing mode: Make sure that Quick Swipe Comping is active in the Take Folder pop-up menu. You mmcan also click the icon in the upper-right corner of the take folder so that it looks as follows: Icon shows that Quick Swipe Comping mode is on. . Try This Create a new comp: With Take 2: Chuck Vox 2 selected from the last task in the previous section, place the mmpointer over the left edge of Chuck Vox Alt, and drag to the right, as far as bar 30. The selected area on Chuck Vox 2 is shortened. Playing back the project plays Chuck Vox Alt to bar 30, followed by the rest of Chuck Vox 2.   When you create a new comp, it is automatically added to the Comp list in the Take Folder menu (Comp 3 in this case). . Save the comp: Choose Duplicate Comp from the Take Folder pop-up menu. The current comp (Comp mm3 in this case) is duplicated and the duplicate (Comp 4) becomes the active comp for any further changes. Edit the comp: Place the pointer over the right edge of the take region Chuck Vox 2, and drag to the mmleft, as far as bar 35. The end of Chuck Vox 2 is removed from the comp, leaving silence.   . Switch take region selections between takes: Click the area that is not selected at the end of Chuck Vox Alt. The clicked area is mmselected and the same area in Chuck Vox 2 is deselected.   Switch back to the saved comp: Choose the comp you saved in an earlier task from the Take Folder pop-up menu mm(Comp 3 in this case). The comp is reloaded along with the edits you made at that time. . Editing Take Regions What if you want to cut a take region into multiple sections, or move these sections around, or even delete them? Next you will experiment with each of these tasks. Getting Ready This section assumes that the Quick Swipe Comping mode is off, allowing you to cut, drag, and delete take folder and take region elements. Change the take folders editing mode: Deselect Quick Swipe Comping from the Take Folder pop-up menu. You can also click mmthe icon in the upper-right corner of the take folder so that it looks as follows: Icon shows that Quick Swipe Comping mode is off. . Try This Cut a take region: Using Comp 3 from the previous section, select the Scissors tool, then click Take 2 at mmbar 35. The take is cut at the clicked position, giving you two separate take regions on the same lane.   Drag a take region: Drag the take regionthe one you cut in the previous taskfrom bar 35 to bar 37. The mmlength of the take folder is extended up to the end point of the take region. Listen to the playback. Delete a take region: Make sure that the take region you dragged in the previous task is selected, then press mmthe Delete key. . Managing Take Folder Contents In this section, youll experiment with some commands in the Take Folder pop-up menu that can help with take folder management. Try This Export an active comp to a new track: Using the current comp in the take folder, choose Export active Comp to New Track mmfrom the Take Folder pop-up menu. The active comp is copied to a new track, which is created below the take folder track. The content of the original take folder remains intact. Crossfades Crossfadesused to create a smooth transition between two adjacent audio regions on a trackare visible between the take regions of the exported comp. Using this command allows you to edit the current comp in the same way as other audio regions. . Move an active comp to a new track: Choose Move active Comp to New Track from the Take Folder pop-up menu. The mmactive comp is moved to a new track, which is created below the take folder track. This comp is no longer available in the original take folder. You might use this option when you are ready to commit to a comp but want to keep all other takes and comps archived in the original take folder. Flatten a take folder: Choose Flatten from the Take Folder pop-up menu. The take folder is replaced with mmmultiple regions that represent the current comp selections. All take region sections not used in the current comp are deleted. Use this option when you want to discard all comps and takes other than the current comp. You can also use the Flatten and Merge command in the Take Folder pop-up menu to mmreplace the take folder with a single region that represents the current comp selections. Use this option when you are ready to fully commit to the comp and dont expect to make any further edits where the individual comp sections intersect. . Key Concepts Metronome: A click in the projects tempo that can be heard during recording or playback. The click makes it easier to play in time with the projects tempo. Count-in: Clicks heard before the start of a recording, making it easier to get into the projects groove. Input slot: A panel on an audio channel strip where you assign the channel strip input. Insert slot: A panel on a channel strip where you insert an effect plug-in. Input Monitoring: Allows you to hear incoming audio when audio tracks are playing, record-enabled, or recording. Take: A recording. Logic Express allows you to create several takes, one after the other, without leaving record mode. Take folder: A container for multiple take recordings. Cycle function: A function that constantly repeats the area between the left and right locator positions. Quick Swipe Comping: The behavior of swiping across take sections to create and edit comps. Drag editing: The behavior of cutting, dragging, and moving take folder and take region elements. Comp: The result of combining selected parts of multiple takes into a single perfect take. . 5 81 Recording MIDI You can use a MIDI keyboard to record MIDI in real time in Logic Express. This chapter focuses on recording options that are specific to recording MIDI in real time. Youll learn how recording over the top of a previous performance can have different outcomesmerging recordings, replacing recordings, or creating take foldersdepending on your recording setup. Youll also experiment with quantization, a process that allows you to correct the timing of MIDI notes. Making a MIDI Recording MIDI recording is similar to audio recording. You play your connected MIDI keyboard and Logic Express automatically records the incoming MIDI events on the record- enabled MIDI or software instrument track. In this chapter, youll only record to a software instrument track. Information about MIDI tracks can be found in the Logic Express User Manual. For details about setting the metronome and count-in prior to recording, see Chapter 4. . 82 Chapter 5 Recording MIDI Getting Ready Create a new software instrument track and load a channel strip setting: Create a new track by doing one of the following:1 If you are using an existing project, click the Add (+) button above the track list, select the Software Instrument option in the New Tracks dialog, then click Create.   If you want to create a new project, see Chapter 2 for details. In the Library tab (Media area), choose a channel strip setting that you will experiment 2 with while recording. Instrument and effect settings are loaded to the Instrument and Insert slots on the left Arrange channel strip. Make sure that your MIDI keyboard is connected.3 . Chapter 5 Recording MIDI 83 Try This Record a software instrument part: Click the Record button on the Transport bar to start recording. You can also press the 1 Asterisk (*) key on keyboards with a numeric keypad, or the R key on other keyboards. Record button Recording begins after the predefined count-in. Use your MIDI keyboard (or the Logic Express Caps Lock keyboard; see Chapter 2) to 2 play some notes. A MIDI region appears on the software instrument track. Click the Stop button on the Transport bar (or press the Space bar) once youre done.3 Stop buttonPlay button Click the Play button on the Transport bar (or press the Space bar) to play back the 4 recording. . Quantizing MIDI If youre not happy with the timing of your performance, you can use the Quantize feature to correct the timing of MIDI notes to the nearest selected musical time value. You do this using the Quantize pop-up menu in the Inspectors Region Parameter box.   Getting Ready Set an appropriate zoom level for the MIDI region: Holding down the Option and Control keys, drag across the MIDI region you recorded mmin the previous section. . Try This Correct the timing of note events: Click the Quantize parameter in the Inspectors Region Parameter box, and choose mm1/16-Note from the pop-up menu. Watch how the note events change position in the MIDI region. This value is generally a good place to start for duplet based rhythms (dividing a beat into two even pieces). Click the Quantize parameter in the Inspectors Region Parameter box, then choose off mmfrom the pop-up menu. The MIDI note events are returned to their original positions. Click the Quantize parameter in the Inspectors Region Parameter box, then choose mm1/12-Note from the pop-up menu (which is the equivalent of an 8th note triplet). The note events move position in the MIDI region. This value is generally a good place to start for triplet based rhythms (dividing a beat into three even pieces). . Overdub Recording MIDI Overdubbing is the process of recording a performance in multiple passes, merging the performances into a single region. Youll experiment with recording multiple MIDI performances on top of an existing performance. Try This Record over an existing MIDI region in Cycle mode: Click the Set Locators button in the Arrange toolbar. 1 Cycle mode is turned on and the left and right locators match the start and end points of the MIDI region you recorded in the previous section. Left locatorRight locator Press the Return key while Logic Express is not playing.2 The playhead moves to the project start position. Press the Asterisk (*) or R key to start recording.3 Recording begins after the predefined count-in. Use your MIDI keyboard (or the Logic Express Caps Lock keyboard) to play some notes. 4 Record as many cycle passes as you wish. Press the Space bar to stop recording.5 . The end result is a single MIDI region that contains the merged performances from each cycle pass. You can also overdub a MIDI recording when not in Cycle mode. To do this: Control-click the Record button on the Transport bar, then choose Recording Settings 1 from the shortcut menu. In the Recording pane, choose Merge with selected regions from the Overlapping 2 Recordings pop-up menu.   Repeat the recording steps from the last task, but without turning on Cycle mode.3 . Replace Recording MIDI Replace recording is the process of erasing all or part of a previous performance while recording a new one. Youll do this by recording in Replace mode. Try This Record over an existing MIDI region in Replace mode: Click the Replace button on the Transport bar.1 Replace buttonCycle button Make sure that Cycle mode is turned on.2 Press the Return key while Logic Express is not playing. 3 The playhead moves to the project start position. Press the Asterisk (*) or R key to start recording.4 Recording will begin after the predefined count-in. Use your MIDI keyboard (or the Logic Express Caps Lock keyboard) to play some notes.5 A new MIDI region is created on top of the existing one. Press the Space bar to stop recording.6 Your new recording replaces whatever portion of the previous material you recorded over, repeating the process for each cycle pass if recording in Cycle mode. . Recording MIDI Takes While you will usually want to record multiple cycle passes into a single region, take recording is also an option. Take recording allows you to record over an existing performance and results in the creation of a take folder with each recording inside. A common scenario is when you are recording multiple passes in Cycle mode, but you can also do this by recording over an existing region. Getting Ready Modify the project setting for MIDI Overlapping Recordings: Control-click the Record button on the Transport bar, then choose Recording Settings 1 from the shortcut menu. In the Recording pane, choose Create take folders from the Overlapping Recordings 2 pop-up menu.   . Try This Record MIDI takes: If you want to record in Cycle mode, click the gray shaded area in the top part of the 1 Bar ruler. Press the Return key while Logic Express is not playing. 2 The playhead moves to the project start position. Press the Asterisk (*) or R key to start recording.3 Recording will begin after the predefined count-in. Use your MIDI keyboard (or the Logic Express Caps Lock keyboard) to play some notes. 4 Record a single pass or as many cycle passes as you wish. Press the Space bar to stop recording.5 The selected software instrument track contains a take folder with multiple takes inside. Double-click the closed take folder to view the contents, click the take you want to 6 hear, then start playback. . Key Concepts Quantization: The process of correcting the timing of MIDI note positions. Quantize pop-up menu: A menu in the Region Parameter box that you use to correct the timing of MIDI notes to the nearest selected musical time value. MIDI region: A container for MIDI eventsindividual MIDI notes or commandsthat are generally created with a MIDI keyboard. Library tab: Tab within the Media area that is used to handle all setting files for channel strips, effects, and instruments. Channel strip setting: Represents the routing of a channel strip, including all inserted effects or instruments (plus their settings). Overdubbing: The process of recording a performance in multiple passes, merging the performances into a single region. Cycle function: A function that constantly repeats the area between the left and right locator positions. Replace mode: The process of erasing all or part of a previous performance while recording a new one. Take: A recording. Logic Express allows you to create several takes, one after the other, without leaving record mode. Take folder: A container for multiple takes. . 6 93 Creating an Arrangement You create an arrangement by dividing, copying, cropping, repeating, cutting, and inserting regions and region sections. In this chapter, youll work with audio and MIDI regions in the Arrange area to create an arrangement for your song. Youll use the following selection and navigation features. PlayheadCycle rangeMarquee toolRight locatorLeft locator Marquee tool: Tool used to select and edit parts of regions by dragging across them. Cycle range: Repeated section of a project, shown as a green stripe in the Bar ruler. Left and right locators: Define the start and end points of a cycle range in the Bar ruler. Playhead: Vertical white line that indicates the current playback position in all horizontal, time-based windows. . 94 Chapter 6 Creating an Arrangement Previewing the Demo Project You cant tackle the arrangement until you first get a feel for the content and structure of the song. Youll preview the contents of the demo project using Solo mode, a mode in which you can select one or more tracks or regions to hear them in isolation. Getting Ready Open the demo project and turn on Solo mode: Open The Numbers Game demo project.1 Click the Solo button on the Transport bar (or press the S key) to turn on Solo mode.2 Solo button The Bar ruler is shaded in yellow, indicating that you are in Solo mode. . Chapter 6 Creating an Arrangement 95 Try This Preview different tracks and regions in the project: Click the Play button on the Transport bar (or press the Space bar) to start playback.mm Play button During playback, click individual track headers (or use the Up Arrow and Down Arrow mmkeys) to hear the entire track play back in Solo mode. Click individual regions to hear them play back in Solo mode.mm Drag across several regions to hear the region selection play back in Solo mode. Drag mmacross all the horn regions, for example. When finished, press the S key to turn off Solo mode.mm Mute a region: During playback, select the Mute tool, then click any region. A second click unmutes mmthe region. Select a region, then press the M key. Press the M key a second time to unmute mmthe region. . Dividing Regions You can slice any region into several parts, thus creating several individual regions. This allows you to move, copy, and delete parts of your arrangment. Try This Divide a region: Select the Scissors tool, then click any region at the required cut position. You can also mmdo this by dragging across the region with the Scissors tool. Scrubbing allows you to hear the audio at the playhead position, making it easier to cut at the correct position. Divide a region into multiple portions of equal length: Hold down the Option key while cutting a region with the Scissors tool. The selected mmregion is cut into several pieceseach the same length as the first segment. Divide a region using locators: Click the shaded gray cycle area in the top part of the Bar ruler.1 Click here to activate the cycle. . The cycle range is activated between the left and right locator positions. Right locatorLeft locator Drag the left or right locator in the Bar ruler to extend or shorten the cycle range.2 Select the region you want to split, then choose Region > Split > Split Regions by 3 Locators in the local menu bar. The section of the region located between the locators is cut at the left and right locator positions. Divide a region using the playhead: Drag the playhead to a position where you want to divide a region, select the region, mmthen choose Region > Split > Split Regions by Playhead in the local menu bar. The region is divided at the playhead position. Divide a region using a marquee selection: Hold down the Command key (which activates the Command-click tool with the mmMarquee tool currently assigned) while dragging across a region. Click the marquee selection area with the Pointer tool to cut the region at the marquee borders. Try pressing the M key on your computer keyboard instead of clicking the marquee mmselection area, as described in the previous task. In addition to the region being divided, the region that was inside the boundaries of the marquee selection is muted. . Merging Regions You can merge two or more selected regions (of the same typeaudio or MIDI) into a single region, making region handling much easier in your arrangement. Try This Merge audio regions: Select the Glue tool, drag to select multiple audio regions, then click one of them. mmWhen Logic Express provides you with the warning that a new audio file will be created, click Continue. The selected audio regions become one audio region, with silence added for any gaps between. A new audio file is added to the Audio Bin. Merge MIDI regions: Drag to select multiple MIDI regions, then click one of them. The selected MIDI regions mmbecome one MIDI region, with silence added for any gaps between. . Copying Regions You can copy regions or region portions. This allows you to reuse entire regions, or portions of them, at other parts of your arrangement. Getting Ready Set an appropriate zoom level: Select Track 13: Gtr Fill, then holding down the Option and Control keys (which mmactivates the Zoom tool), drag across the Gtr Fill audio region.   . Try This Copy a region section by dragging: Using the Marquee tool, drag to select the area between bars 17 3 1 1 and 17 3 3 1.1   . Holding down the Option key, drag the marquee selection area, release the mouse 2 button at bar 19 4 1 1 on the same track, then release the Option key.   The marquee selection area is copied at bar 19 4 1 1. Copy a region using edit commands: Click the Arrange area background to remove the previous marquee selection.1 Move the playhead to bar 20.2 Select the newly created region Gtr Fill.5 at bar 19 4 1 1.3 Choose Edit > Copy (or press Command-C).4 The region is copied. . Choose Edit > Paste (or press Command-V).5 The region is pasted at bar 20.   Copy an entire region: Hold down the Option key while dragging any region to another position, only mmreleasing the Option key after you release the mouse button. . Cropping Regions You can remove all parts of a region that fall outside the boundaries of a marquee selection. Try This Crop a region: Select Track 12: Guitar Rev, then using the Marquee tool, drag to select the area 1 between bars 65 3 1 1 and 66 3 1 1.   . Press Control-C (which activates the Crop Regions outside Locators or Marquee 2 Selection key command). The region parts that fall outside the boundaries of the marquee selection are cropped.   . Editing Arrange Sections You can remove an entire passage from your arrangement, inserting it elsewhere in the song, or you can repeat a section of your arrangement. Youll explore these activities using the demo project. Getting Ready Holding down the Option and Control keys (which activates the Zoom tool), mmclick anywhere in the Arrange area background until the project returns to its original zoom level setting. Try This Repeat a section of the project: Drag the left and right locators of an active cycle range to select the section of a mmproject you want to repeat, then choose Region > Cut/Insert Time > Repeat Section Between Locators in the local menu bar. The entire section that falls within the locator positions is repeated. Cut a section from the project: Drag the left and right locators of an active cycle range to select the section of a mmproject you want to remove, then choose Region > Cut/Insert Time > Snip: Cut Section Between Locators in the local menu bar. The entire section that falls within the locator positions is removed. Insert a section in the project: After cutting a section from your project, move the playhead to the position where you mmwant to insert it, then choose Region > Cut/Insert Time > Splice: Insert Snipped Section at Playhead in the local menu bar. The entire section is inserted at the playhead position. . Key Concepts Arrangement: The process of organizing your musical material into a song structure. Left and right locators: Locators that define the start and end points of a cycle range in the Bar ruler. Playhead: A vertical white line that indicates the current playback position in all horizontal, time-based Logic Express windows. Solo mode: A mode in which you can select one or more tracks or regions to hear them in isolation. Marquee tool: Used to select and edit parts of regions by dragging across them. Mute tool: Used to stop a region or region section from playing by clicking it. Glue tool: Used to merge regions by selecting and clicking them. Scissors tool: Used to divide a region by clicking it. . 7 107 Flex Time Editing You can use Flex Time editing functions to edit the timing of single or multiple audio regions. This chapter introduces you to the techniques used for Flex Time editing as well as the track-based settings that detemine how the timing of your audio will be altered. Youll learn how to correct a single note or the timing of an entire region, all within the Arrange window. Flex Time editing greatly simplifies the process required for altering the timing of audio material. It allows you to compress or stretch the time between specified points in an audio region without the need for more traditional processes like cutting, nudging, and crossfading. Though comparable to what is sometimes referred to as elastic audio in other applications, Flex Time editing provides unique advantages, such as the option to employ beat slicing methods that do not rely on time stretching algorithms. Flex Time editing is largely dependent on a set of markers called transient markers, which denote significant points in an audio file. The audio on a track is analyzed for transients the first time you enable that track for Flex Time editing. Any detected transients in the file are marked with transient markers. . 108 Chapter 7 Flex Time Editing You edit the timing of audio material using flex markers. When you move a flex marker, it time compresses or expands the area around it. The initial boundaries within which this is done is determined by the transient markers. You manipulate flex markers either in the Arrange areas Flex view, or invisibly using the Flex tool. You can create single or multiple flex markers in an audio file, enabling you to manipulate the position of single notes or complete phrases. . Chapter 7 Flex Time Editing 109 Exploring Flex View and Flex Modes Youll start by turning on Flex view in the Arrange area and exploring some of the available flex modes. Getting Ready Open The Numbers Game demo project. Track 1: Chuck Vox is selected by default.mm Try This Display Flex view in the Arrange area: Choose View > Flex View. Flex view is turned on and the Flex Mode menu is displayed mmin the track header of Track 1: Chuck Vox. Flex Mode menu . Locate the available flex modes: Click the Flex Mode menu in the track header of Track 1: Chuck Vox. The flex modes are mmlisted in the pop-up menu.   Click the Flex Mode parameter in the Inspectors Track Parameter box. The flex modes mmare listed in the pop-up menu.   . Creating and Moving Flex Markers in Flex View You use flex markers to manually alter the timing of audio material. You can create single or multiple flex markers in an audio file, enabling you to manipulate whole or partial areas of the material by moving these flex markers. Getting Ready Define a cycle range for soloed playback and set an appropriate zoom level: Click the Solo (S) button on Track 1: Chuck Vox to solo the entire track.1   . Click the gray shaded area in the upper part of the Bar ruler to turn on Cycle mode, 2 then change the left and right locators in the Transport bar to 9 1 1 1 and 10 1 1 1, respectively. Left locatorRight locator Holding down the Option and Control keys (which activates the Zoom tool), drag 3 across the first region Chuck Vox.1 on Track 1: Chuck Vox, dragging between bars 9 and 10 only.   . Try This Create and drag a single flex marker: Click the Flex Mode menu in the track header of Track 1: Chuck Vox, then choose 1 Monophonic from the pop-up menu. All audio files on the track are analyzed for transients, and all detected transients are marked and stored in the audio files. Transient marker Press the Space bar to start playback.2 . Place the pointer over the upper half of the audio region just before bar 9.3, just on top 3 of the existing transient marker. The pointer shown here indicates an existing transient marker:   Click the area on top of the transient marker to create a flex marker.4 Flex marker . Drag the flex marker to the right, as far as bar 9 3 3 1. It should look as follows:5 Time compressed audioTime expanded audio The audio material to the left of the flex marker is time expanded (indicated by the orange color) and the audio material to the right is time compressed (indicated by green). Listen to the result of this time stretching and compression.6 . Create and drag multiple flex markers: Place the pointer over the lower half of the audio region after bar 9 2 3 1, just on 1 top of the existing transient marker. The pointer shown here indicates an existing transient marker:   . Click the transient marker. 2 Three flex markers are createdon the clicked transient marker, on the previous transient marker, and on the next transient marker:   . Experiment with time compression and expansion by dragging the middle flex marker 3 to the right or to the left. Depending on the direction you move the middle flex marker, the audio material between the center and right flex markers is either time compressed or expanded, and the same is true for the audio material between the center and left flex markers. Time compressed audioTime expanded audio Press the Space bar to listen to the result of this time stretching and compression.4 . Creating and Moving Flex Markers with the Flex Tool You also have access to Flex Time editing with the Flex tool. The Flex tool allows you to drag points in the regions waveform and move them where you want. The waveforms movement is restricted by transient markers on either side of the place you began dragging. To extend the editing area, drag beyond these transients and the boundary will extend to the next or previous transient. Getting Ready Turn off Flex view and select the Flex tool: Choose View > Flex View. Flex view is turned off and all audio tracks return to their mmdefault view. Select the Flex tool from the Tool menu in the Arrange area. Flex tool . Try This Create and drag flex markers with the Flex tool: Place the pointer over the audio region to the right of 9.3. Youll know that the pointer 1 is on top of an existing transient marker when it looks as follows:   Drag from the transient marker to the left, as far as bar 9.3. The area will look as follows:2   . The audio material to the right of the dragged flex marker is time expanded up to the following flex marker. The audio material to the left of the dragged flex marker is time compressed up to the previous flex marker. Press the Space bar to listen to the result of this time stretching and compression.3 Quantizing Audio If youre not happy with the timing of your performance, you can use the Quantize feature to correct the timing of audio material to the nearest selected musical time value. This feature is only available for audio tracks that have been enabled for Flex Time editing. To quantize audio, you use the Quantize pop-up menu in the Inspectors Region Parameter box. Click here to open the Quantize menu. . Getting Ready Make sure that Track 1: Chuck Vox is no longer soloed by turning off its Solo button.mm Try This Apply quantization to a region: Select the Tambourine region on Track 32: Tambourine.1 Click the Set Locators button in the Arrange toolbar, then press the Space bar to start 2 playback. Choose Monophonic from the track headers Flex Mode pop-up menu.3 During playback, choose 8C Swing from the Quantize pop-up menu.4 Listen to the playback result.5 Repeat steps 2 to 5 for other regions in the demo project.6 . Key Concepts Flex Time editing: A process that allows you to edit the timing of single or multiple audio regions. Flex mode: A track-based setting that detemines how the timing of your audio will be altered. Transient marker: A marker that denotes a significant point or peak in an audio file. Transient detection process: A process that analyzes audio files for transients the first time you enable a track for Flex Time editing. Detected transients are marked and stored in the audio files. Flex marker: A marker that you drag to alter the timing of audio material. Flex view: An Arrange area view that allows you to edit the timing of audio material. Flex tool: A tool that allows you quick access to the basic Flex Time editing functionality, without having to turn on Flex view in the Arrange area. Quantization: The process of correcting the timing of your material. Quantize pop-up menu: A menu in the Region Parameter box that allows you to set the value used for quantization. . 8 125 Editing MIDI Events You use the MIDI editors to edit the position, length, pitch, and velocity of MIDI events in MIDI regions. You can edit individual MIDI events by selecting a MIDI region in the Arrange area and opening one of the MIDI editors. Which editor you use depends on the type of editing you want to carry out. In this chapter, youll explore some of the editors while also looking at the editing capabilities of the Piano Roll Editor in more depth. Exploring the MIDI Editors In the Piano Roll Editor, MIDI note events are represented by horizontal rectangles, aligned on a grid of horizontal and vertical lines. In the Score Editor, they are represented by traditional music notation. Getting Ready Open The Numbers Game demo project.mm . 126 Chapter 8 Editing MIDI Events Try This Select a MIDI region and open the Piano Roll Editor: Select the first MIDI region on Track 14: Bass, and click the Piano Roll button at the mmbottom of the Arrange area (or press the P key). The MIDI events are represented by horizontal rectangles.   The horizontal placement of note events indicates their temporal (bar, beat, and sub-beat) positioning within the region and project. The vertical placement of note events indicates their pitchthe higher the note position in the Piano Roll area, the higher the pitch. The length of the rectangle is directly proportional to the note event length. . Chapter 8 Editing MIDI Events 127 The color of the rectangle and the horizontal line through the beam indicate the velocity of the note eventhow loud the note is played. Open the Score Editor: Click the Score button at the bottom of the Arrange area (or press the N key). The note mmevents of the selected MIDI region are displayed as traditional notation in the Score Editor.   . Selecting Notes Youll use the Pointer tool to select note events in the Piano Roll Editor. Getting Ready Open the Piano Roll Editor by pressing the P key.mm Try This Select note events: Click any note event in the Piano Roll area. The note event is selected and is played mmback at the same time. Click the Piano Roll background, then drag across several note events.mm Select note events of the same pitch: Click one of the Piano Roll keys at the left of the Piano Roll area. All notes of the same mmpitch are selected while also being played back. Click a Piano Roll key to select all notes of the same pitch. . Drag across a range of Piano Roll keys. All note events in the pitch range are selected.mm Drag across the Piano Roll keys to select all notes of multiple pitches. . Creating Notes Youll use the Pencil tool to create note events in the Piano Roll Editor. The Pencil tool is assigned to the Command-click tool in the Piano Roll Editor by default. Try This Create note events: Holding down the Command key (which activates the Pencil tool), click your chosen mmposition and pitch in the Piano Roll Editor. Click with the Pencil tool to create a note event. Holding down the Command key, click an existing note event, then click your chosen mmposition and pitch in the Piano Roll Editor. A new note event is created with the same channel, velocity, and length as the note event you clicked. . Editing the Position of Notes You can move selected note events by dragging them in the Piano Roll Editor. If you move a note event horizontally, it is moved in time. If you move a note event vertically, it is transposedmoved up or down in pitch. Try This Move note events: Drag any note event horizontally.mm   Drag across multiple note events to select them, then drag them to another position.mm Copy note events: Holding down the Option key, drag any note event horizontally, only releasing the mmOption key after releasing the mouse button. The note event is copied.   . Change the pitch of note events: Click any Piano Roll key to select all note events of the same pitch, then drag the note mmevents vertically.   The pitch of the selected note events is changed. . Editing the Length of Notes You can edit the length of note events in the Piano Roll Editor individually or in relation to one another. Try This Change the length of a note event: Drag the left or right edge of any note event. The event is either shortened or mmlengthened, depending on the direction you dragged.   Select any two note events, then hold down the Shift key while dragging the right mmedge of one of them. The same end point is set for both notes.   . Select any two note events, then hold down the Shift and Option keys while dragging mmthe right edge of one of them. The same length is set for both notes and you can resize them.   Select any note event, then choose Functions > Note Events > Note Force Legato mm(selected/any) from the local menu bar. The selected note is lengthened up to the following note event, regardless of whether the following note is selected or not. Select any two note events (click the first and Shift-click the second), then choose mmFunctions > Note Events > Note Force Legato (selected/selected). The selected note event is lengthened up to the next selected note event. . Muting Notes Youll use the Mute tool to mute selected note events in the Piano Roll Editor. Getting Ready Select the Mute tool from the Tool menu in the Piano Roll Editor.mm Mute tool Try This Mute note events: Click any note event with the Mute tool. The note is dimmed and can no longer be mmheard during playback. Click with the Mute tool to mute the note event. Click the note event a second time with the Mute tool to unmute it. Drag across multiple note events, then click one of them with the Mute tool. All notes mmin the selection are dimmed and no longer heard during playback. Click one of the note events a second time with the Mute tool to unmute them all. . Click any Piano Roll key with the Mute tool. All note events of that particular pitch are mmmuted. Click the Piano Roll key a second time with the Mute tool to unmute them all. Editing the Velocity of Notes Youll use the Velocity tool to edit note velocity in the Piano Roll Editor. Both the color of the rectangle and the horizontal line through the beam indicate the velocity of the note eventthe force at which the note is played. Low velocityHigh velocity . Getting Ready Select the Velocity tool from the Tool menu in the Piano Roll Editor.mm Velocity tool Try This Change the velocity of note events: Drag any note event downward with the Velocity tool. A help tag indicates the velocity mmvalue of the note you have clicked, with this value decreasing as you drag downward. The note color changes and the horizontal line inside the beam shortens. Drag the same note event upward, while watching the help tag, the note color, and the mmhorizontal line. . Quantizing Notes You use the Quantize pop-up menu in the Piano Roll Editor to assign a quantization value to one or more selected note events. You can also use the Quantize button to quantize selected events with the value chosen from the Quantize pop-up menu. Quantize pop-up menuQuantize button Try This Correct the timing of note events: Select one or more note events in the Piano Roll Editor, then choose a quantization mmvalue from the Quantize pop-up menu. The selected note events map to the grid according to the chosen quantization value. Select additional note events, then click the Quantize button. The selected note events mmmap to the grid according to the previously chosen quantization value. . Key Concepts MIDI region: A container for MIDI eventsindividual MIDI notes or commandsthat are generally created with a MIDI keyboard. MIDI event: Represents an individual MIDI note or command. Piano Roll Editor: Where MIDI note events are represented by horizontal rectangles, aligned on a grid of horizontal and vertical lines. Score Editor: Where MIDI note events are displayed as traditional music notation. Velocity: Defines the force at which a note is played. Transposition: The process of moving a note event up or down in pitch. Cycle function: A function that constantly repeats the area between the left and right locator positions. Left and right locators: Locators that define the start and end points of a cycle range in the Bar ruler. Quantization: The process of correcting the timing of your material. Quantize pop-up menu: A menu in the Piano Roll Editor that you use to correct the timing of MIDI notes to the nearest selected musical time value. Quantize button: A button in the Piano Roll Editor that allows you to quantize selected events using the value chosen in the Quantize pop-up menu. . 9 141 Mixing the Project You use the Mixer when you want to refine the sound of each musical element in your projectcreating a unified mix. In this chapter, youll explore the Mixer, work with channel strip groups, work with send effects, and create submixes. When working on each of these tasks in the Mixer, youll encounter the following channel strip types: Audio channel strips: Control the playback and recording of audio signals on audio tracks. Instrument channel strips: Allow you to use and control software instruments. Software instrument plug-ins are inserted into the channel strips Instrument slot. The instrument channel strip can then be driven by a recorded MIDI region or by direct MIDI inputplaying your MIDI keyboard. Aux channel strips: Used to set up send returns, where a channel strip signal is routed to an aux channel strip for effects processing. Aux channel strips are also used for grouping purposes and for distributing a signal to multiple destinations via sends. Output channel strips: Represent the physical audio outputs of your audio interface. These channel strips are used to adjust the overall volume and stereo/pan balance of all audio, instrument, or aux channel strips routed into them. Master channel strip: A global level control for all output channel strips. It changes the gain of output channel strips without affecting the level relationships between them. . 142 Chapter 9 Mixing the Project Exploring the Mixer The Mixer provides options for changing what channel strips are being viewed and in what order. The default settings display all the channel strips in the order they appear in the Arrange area, along with the aux and output channel strips they are sending signals to. Filter buttonsView buttons . Chapter 9 Mixing the Project 143 As projects grow large and more complex, you may find it useful to temporarily limit the number of channel strips displayed to those you need to focus on for a given task. You have the possibility to switch the Mixer between three different viewsSingle, Arrange, and All. You can also determine which channel strips are displayed using the filter buttons. Getting Ready Open the Mixer area in the demo project: Open The Numbers Game demo project.1 Click the Mixer button at the bottom of the Arrange area (or press the X key).2 Try This Customize the Mixer view using the filter buttons: Deactivate all filter buttons except for the Inst button. Only instrument channel strips mmare now visible in the Mixer area. Activate the Audio button and deactivate the Inst button. Only audio channel strips are mmnow visible in the Mixer area. Customize the Mixer using the view buttons: Select the channel strip Chuck Vox 1, then click the Single button. Single view limits mmthe Mixer display to a single channel stripthat of the track selected in the Arrange areaand its signal flow. Click the Arrange button. In Arrange view, the Mixer displays all channel strips that mmcorrespond to tracks used in the Arrange window and their signal flow. In this case, your settings from when you last activated the Audio button, and deactivated all others, are still intact. The settings are saved with the view. . Working with Channel Strip Groups You can create a channel strip group and modify selected parameters for the entire group using a single control. You do this by selecting multiple channel strips and assigning them to a particular group from the channel strips Group slot. Group slotVolume faderPan control Try This Create a group from multiple channel strips: Drag horizontally across channel strips 2 to 9 (over the word Inserts, or I/O text, for 1 example) to select them. Click the Group slot of any one of these eight channel strips, then choose Group 2 from 2 the pop-up menu. The group number is assigned to the channel strip Group slots and the Group Settings window opens automatically. The Group Settings window determines which controls and parameters are synced for those channel strips that make up the group. . Double-click the Name field, type Horns, then press the Return key.3 The group name is added to the group number on the channel strip Group slots. The selected channel strips are all assigned to group 2: Horns. . Close the Group Settings window by clicking the windows close button.4 Add another channel strip to the last created group: Option-click the Group slot of channel strip 10 (another horn channel strip). The mmchannel strip is added to the previously created group 2: Horns. Change the settings of an active group: Click the Group slot of channel strip 2, choose Open Group Settings from the pop-up 1 menu, select the Solo checkbox, then close the Group Settings window. Back in the Mixer, click the Solo button on channel strip 2.2 All nine channel strips in Group 2: Horns are soloed. Modify the volume level for the group: Drag the Volume fader of any channel strip in Group 2: Horns. The Volume fader moves mmfor each channel strip, while maintaining the relative values between them. Modify the Pan control for the group: Drag the Pan control of any channel strip in Group 2: Horns vertically or horizontally. mmThe Pan control moves for each channel strip, while maintaining the relative values between them. . Adding Effects to Multiple Channel Strips Chapter 3 discussed using Insert slots to add effects into a channel strips signal flow. But what if you want to use the same effect on more than one channel strip? You do this using Send slotssending the signal on each channel strip to the same aux channel strip, on which you add the effects. Insert slotSend slot Try This Add an effect to multiple channel strips: Drag horizontally across channel strips 14 and 15 to select them.1 Click the top empty Send slot of either channel strip, then choose Bus 6 from the Bus 2 pop-up menu, for example. . The Bus number is assigned to both Send slots, and Aux 6an aux channel stripis automatically created (only in the case of an unused Bus assignment). Send slotSend knob Drag the Send knob on channel strip 14 or 15 to set the amount of signal that you want 3 to send to Aux 6. As you do so, the send amount value is shown on the Send slot. Double-click either Send slot to jump directly to Aux 6.4 Click the top empty Insert slot of Aux 6, then choose an effect from the pop-up menu.5 Modify the volume level and pan settings for the signal on Aux 6.6 . Creating a Submix Another useful mixing procedure is to submix multiple channel strips into one aux channel strip. Like grouping, this makes it easy to control multiple channel strips. For this to work, the complete signal from each channel strip needs to be routed to an aux channel strip via the channel strip Output slots. Output slot . Try This Create a submix: Drag across channel strips 11 to 13 to select them all.1 Click the Output slot on any of these channel strips, then choose Bus 7 from the Bus 2 pop-up menu, for example. The Bus number is assigned to the Output slot of all three channel strips, and Aux 7 is automatically created (only in the case of an unused Bus assignment). Double-click any of the three Output slots to jump directly to Aux 7.3 You now have a submix of the selected three channel strips. You can control this 4 submix by modifying the volume level and pan settings and loading additional effects from Aux 7. Routing Signals with a Multi-Output Instrument Some software instruments allow you to isolate a sound and route it to its own aux channel strip where it can be independently mixed and processed. Within Logic Express, you can use Ultrabeat and the EXS 24 sampler for such purposes. Getting Ready Select channel strip 39 in the Mixer, then click the Single button. You are provided with mman immediate overview of channel strip 39 and its signal flow. . Try This Insert and set up a multi-output instrument: Click the Instrument slot of channel strip 39 and make sure that Ultrabeat > Multi 1 Output is chosen. Click the Add (+) button at the bottom of the channel strip.2 Instrument slot with Ultrabeat loadedInput slot set to UB 34Add button An aux channel strip is created with its Input slot set to UB 3-4. Double-click the Instrument slot of channel strip 39.3 The Ultrabeat plug-in window opens. . Click the out column of the Snare entry in the plug-in window, then choose 3-4.4   Double-click the EQ area on the aux channel strip to apply EQ.5 Click the first Send slot of the aux channel strip, then choose Bus > Bus 2 (DrumVerb).6 The snare signal is sent to the existing aux 2 channel strip (already set up for snare). . Key Concepts Mixer: Interface area where you mix your project. Audio channel strips: Control the playback and recording of audio signals on audio tracks. Instrument channel strips: Allow you to use and control software instruments. Software instrument plug-ins are inserted into the channel strips Instrument slot. Aux channel strips: Used to set up send returns, where a channel strip signal is routed to an aux channel strip for effects processing. Aux channel strips are also used for grouping purposes and for distributing a signal to multiple destinations via sends. Output channel strips: Represent the physical audio outputs of your audio interface. Master channel strip: A global level control for all output channel strips. Mixer View buttons: Allow you to switch the Mixer between the Single, Arrange, and All views, limiting the Mixer view to channel strips required for the task at hand. Mixer Filter buttons: Allow you to to filter the display of specific channel strip types. Group slot: Used to control a channel strips group assignment. Group Settings window: Where you define the behavior of each group. Volume fader: Used to set a channel strips playback or monitoring volume. Pan control: Used to control the position of the signal in the stereo image. Send slot: Used to route a channel strips signal to an aux channel strip. Output slot: Used to set the channel strips output path. Multi-Output Instrument: Allows you to isolate a sound and route it to its own aux channel strip where it can be independently mixed and processed. . 10 155 Automating Your Mix You can record, edit, and play back fully automated mixes in Logic Express. With the help of the Logic Express automation features, you can automate the controls and parameters of channel strips and plug-ins by recording them and playing them back. This allows you to create complex, animated mixeswith automatic channel strip mutes, channel strip signals that pan from side to side, channel strip groups fading in or out, and much more. In this chapter, youll explore how to automate the controls and parameters of channel strips using track automation. . 156 Chapter 10 Automating Your Mix Exploring Track Automation Track automation is displayed on a transparent gray shaded area that runs the length of your project. Getting Ready Open the demo project: Open The Numbers Game demo project.mm Try This Display track automation: With Track 1: Chuck Vox selected, choose View > Track Automation in the local menu mmbar (or press the A key). The automation lane on Track 1: Chuck Vox is displayed, along with some existing volume automation data. Track automation laneVolume automation data . Chapter 10 Automating Your Mix 157 Set the automation mode for a track: If you cannot see the Automation Mode menu in the track header of Track 1: Chuck 1 Vox, drag the lower-left corner of the track header downward. Drag here to zoom. Automation Mode menu This zooms the track header area, allowing you to see the Automation Mode menu. Click the Automation Mode menu on Track 1: Chuck Vox, then choose Read from the 2 pop-up menu. Automation Mode menu set to Read mode Choosing Read allows you to play back all automation that exists on the track. . Click the Play button on the Transport bar (or press the Space bar) to start playback.3 Play button Watch how the Volume fader in the left Arrange channel strip changes during playback. The volume fader follows the pre-recorded automation data on the track. Switch between automation parameters: Select Track 2: Trumpet 1.1 The automation lane on Track 2: Trumpet 1 is displayed, along with some existing volume automation data. Click the Automation Parameter menu, then choose Pan from the pop-up menu.2 Automation Parameter menu Pan automation data is shown on Track 2: Trumpet 1. . Using Touch and Latch Modes You can use Touch and Latch modes to create your own automation data. Dont use Write mode. All automation data on a track is erased the minute Important: you start playback with Write mode enabled. Try This Create automation data using Touch mode: Select Track 1: Chuck Vox, click the Automation Mode menu, then choose Touch from 1 the pop-up menu. Press the Space bar to start playback.2 Drag the Volume fader on the left Arrange channel strip vertically.3 Volume fader Release the Volume fader after a couple of bars.4 The Volume fader follows existing automation data on the track. . Drag the Volume fader vertically when you encounter existing automation data from 5 bar 9 onward. The existing automation data is overwritten. Release the Volume fader after a couple of bars.6 The Volume fader once again follows existing automation data on the track. Click the Stop button on the Transport bar (or press the Space bar) to stop playback.7 Stop button Touch mode allows you to modify the value of the chosen automation parameter when automation is active. After releasing the fader or knob, the parameter follows existing automation data on the track. . Create automation data using Latch mode: Click the Automation Mode menu on Track 1: Chuck Vox, then choose Latch from the 1 pop-up menu. Press the Space bar to start playback.2 Drag the Volume fader on the left Arrange channel strip vertically.3 Release the Volume fader after a couple of bars.4 The Volume fader does not follow existing automation data on the track as in Touch mode. Instead, the Volume fader continues to remain in the position at which you released the mouse button. Drag the Volume fader vertically when you encounter existing automation data from 5 bar 9 onward. The existing automation data is overwritten. Release the Volume fader after a couple of bars.6 The Volume fader once again remains in the position at which you released the mouse button. Press the Space bar to start playback.7 Latch mode works like Touch mode, but the current value replaces any existing automation data after you release the fader or knob. . Creating and Editing Automation Nodes and Lines In this section, youll experiment with creating and editing automation nodes and lines. NodeLine Try This Create automation nodes: Click on, or just outside, an automation line (not on a node). A new node is created.mm Hold down the Command key (which activates the Command-click tool with the mmMarquee tool currently assigned) while dragging across a region. Click the marquee selection area with the Pointer tool. A node is created at both marquee borders. Select any region, then choose Track > Track Automation > Create Nodes at Region mmBorders. One node is created at each end of the region. You can also choose Track > Track Automation > Create Two Nodes at Region Borders mmto create two nodes at each end of the region. Edit automation nodes and lines: Drag any of the existing automation nodes or lines vertically or horizontally.mm . Draw in automation: Draw automation lines and curves in the automation track with the Pencil tool.mm Draw in automation data with the Pencil tool. Key Concepts Automation: The ability to record, edit, and play back the movements of all knobs, controls, and buttons on channel strips and plug-ins. Track automation: Automation displayed on an automation track. Automation Mode menu: A track header menu on automation tracks that determines whether you read, touch, latch, or write automation data. Automation Parameter menu: A track header menu on automation tracks that allows you to choose the visible automation parameter on the track automation lane. Read mode: Automates the current track, using the existing automation data. Touch mode: Allows you to modify the value of the chosen automation parameter, when automation is active. After releasing the fader or knob, the parameter follows existing automation data on the track. Latch mode: Works like Touch mode, but the current value replaces any existing automation data after you release the fader or knob. . 11 165 Getting Answers There are additional resources you can use to get answers to your questions about using Logic Express. Now that you have learned about the basic features of Logic Express, you probably have more questions. You can use Logic Express Help to find the answers you need. Exploring Logic Express Help Logic Express Help provides in-depth descriptions and instructions about the features and controls (the tasks you can perform) with Logic Express. Try This Open the Logic Express User Manual: In Logic Express, choose Help > Logic Express Help, then click Logic Express 9: mmUser Manual. Open the Logic Express Instruments manual: In Logic Express, choose Help > Logic Express Help, then click Logic Express 9: mmInstruments. Open the Logic Express Effects manual: In Logic Express, choose Help > Logic Express Help, then click Logic Express 9: Effects.mm . 166 Chapter 11 Getting Answers Search for a specific topic that interests you: Enter the topic of your choice in the search field at the top of the Help Viewer window. mmSelect topics from the search results list that you want to know more about. When you search in the Logic Express manual, the search results include relevant topics from the Logic Express Instruments and Logic Express Effects manuals as well. Search for Apple Support information: Choose Help > Logic Express Help, then click Logic Express Support. Browse topics that mminterest you. Read discussions on the Logic Express forum: Choose Help > Logic Express Help, then click Logic Express Discussions in the list of mmadditional resources. Browse discussion topics that interest you. Whats Next? Youve now had a brief introduction to Logic Express and a selection of its features. You can continue to experiment with the demo project files on your own or delete them and start work with your own clips. Refer to Logic Express Help for the in-depth information you need. ================================================================================ **Disclaimer:** This guide is volunteer-submitted and provided "as is" without warranty. Use caution and verify all information before proceeding. "I Can Work This Thing" assumes no responsibility for accuracy, safety, or any damage/injury resulting from use. For complex or dangerous procedures, consult qualified professionals. Report issues or suggestions to https://icanworkthisthing.com ================================================================================